Always in your comfort zone
Select Maintenance Plan
With our Comprehensive Maintenance Advantage Program, you receive superior preventative maintenance. This plan is designed to extend the life of your heating and cooling equipment, help cut costly repairs and it satisfies manufacturer warranty maintenance requirements. This program is industry recognized as the best way to maximize your energy efficiency, which SAVES YOU MONEY and promotes a safer environment for you and your family.
Benefits
- Lower Utility Bills
- Extended Equipment Life
- 24-Hr Emergency Service
- Fewer Repairs
- NO Overtime Charge for emergencies!!!
- Manufacturer Warranty Protection
- 15% Discount on Repairs
- PRIORTY CUSTOMER
- 10% Discount on Equipment Replacement
- 1 Year Warranty on Parts and Labour
- Inflation Protection
An improperly maintained furnace can break down unexpectedly and cost you money and time. Tune-ups can help identify potential problems before they become costly breakdowns, and will maximize efficiency to help protect you from rising energy costs and save you money!
Most of all, maintenance of your furnace is important to protect the health and safety of you and your family.
We will ensure your furnace is operating as safely and efficiently as possible and offer suggestions for repairs to optimize performance.
Our Heating Maintenance Advantage Program provides an Annual 22-Point tune-up of 1 Heating Unit. We include a complete Professional Inspection that covers the annual maintenance required by the manufacturer.
This program will help
- Keep your family safe
- Detect hazardous Carbon Monoxide
- Extend the life of your heating equipment
- Reduce your monthly heating bills
- Help prevent a middle of the night furnace breakdown
The following diagnostic and safety checks are included, if required for specific equipment, as per manufacturer’s recommendations
- Check operation of Thermostat
- Safety Test for Carbon Monoxide
- Check Heating system for proper operation
- Inspect General Condition/test by putting system through a full operation cycle
- Clean or Replace owner supplied filters
- Inspect Venting for rust and leakage
- Inspect temperature rise/drop Inspect heat exchanger if accessible
- Test all Safety controls
- Inspect Condensate lines
- Check combustion and ventilation air
- Check condition of expansion tank
- Check fittings for gas leaks
- Check Burners and pilot assembly and adjust as necessary
- Check Blower Operation
- Test Limit switches
Heating Unit covers one of the following: residential natural gas or propane furnace, residential natural gas or propane boiler, space heater, air handler, Heat Recovery Ventilation Unit, Energy Recovery Ventilation Unit or Natural Gas Fireplace. ("Heating unit").
Equipment using conversion burners, the conversion burner itself, and ductless or wall units are not eligible for coverage. Equipment serving more than one dwelling is not eligible for coverage. Heating equipment that uses any fuel other than natural gas or propane (e.g. oil, wood, electricity, etc.) is not eligible for coverage. Any equipment not readily accessible by our Technicians is not eligible for coverage.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
A leaking or dirty air conditioner costs time and money and can harm the environment. Tune-ups can help identify potential problems before they become costly breakdowns, and will maximize efficiency to help protect you from rising energy costs and save you money!
We will ensure your air conditioner is operating as safely and efficiently as possible and offer suggestions for repairs to optimize performance.
Our Cooling Maintenance Advantage Program provides an annual 19-point tune-up of 1 Cooling Unit. We include a complete Professional Inspection that covers the annual maintenance required by the manufacturer.
This Program will help
- Detect hazardous carbon monoxide
- Improve indoor air quality
- Extend the life of your cooling equipment
- Reduce the hassle of unexpected and inconvenient breakdowns
The following diagnostic and safety checks are included, if required for specific equipment, as per manufacturer’s recommendations
- Check operation of Thermostat
- Safety test for Carbon Monoxide
- Check Cooling system for proper operation
- Inspect General Condition/test by putting system through a complete operation cycle
- Check for refrigerant leaks
- Check for hazardous debris
- Clean or Replace owner supplied filters.
- Inspect Venting for rust and leakage.
- Inspect Condensate lines for blockage
- Inspect outdoor condensing unit
- Inspect Indoor coil
Cooling Unit includes Coverage for a residential electric powered central air conditioning unit. (“cooling unit”). Natural gas powered, ductless or wall units are not eligible for coverage. Equipment serving more than one dwelling is not eligible for coverage. Any equipment not readily accessible by our Technicians is not eligible for coverage.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
An improperly maintained tankless water heater can break down unexpectedly and cost you money and time. Tune-ups can help identify potential problems before they become costly breakdowns, and will maximize efficiency to help protect you from rising energy costs and save you money!
Most of all, maintenance of your tankless water heater s important to protect the health and safety of you and your family.
We will ensure your tankless water heater is operating as safely and efficiently as possible and offer suggestions for repairs to optimize performance.
Our Tankless Water Heater Maintenance Advantage Program provides an Annual 10-point tune-up and Preventative Maintenance of 1 Tankless Water Heater. We include a Complete Professional Inspection that covers the annual maintenance required by the manufacturer.
This program will help
- Keep your family safe
- Detect hazardous Carbon Monoxide
- Extend the life of your heating equipment
- Reduce your monthly heating bills
- Help prevent an unexpected breakdown
The following diagnostic and safety checks are included, if required for specific equipment, as per manufacturer’s recommendations
- Check operation of Thermostat
- Safety test for Carbon Monoxide
- Safety tests for gas leaks
- Safety test for combustion gas exhaust of water tank
- Inspect General Condition/test by putting through a complete operation cycle
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Covers both “Heating” and “Cooling” Maintenance Advantage Plans as above.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Covers both “Heating” and “Tankless Water Heater” Maintenance Advantage Plans as above.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Select Maintenance Plan
*Free Parts and Labour with the Preferred Protection Plan
Includes all of the benefits of our Heating and or Cooling Maintenance Advantage Plans…..
PLUS, the Preferred Protection Plans offer the ultimate in peace of mind. You will enjoy guaranteed service from our licensed technicians, free parts and labour on most repairs, no deductible…..24 hours a day, 7 days a week!
Our Preferred Protection Plans cover the diagnosis and repair, replacement or adjustment, as we determine necessary, of specified parts within your “heating unit” (if your plan includes a “Heating Protection Plan”) and “cooling unit” (if your plan includes a “Cooling Protection Plan”) subject to the exceptions noted below. For parts and services included in the Preferred Heating/Cooling Protection Plans, you are protected from all labour and part replacement costs, subject to the limits described below.
Includes all of the benefits of our Heating Maintenance Advantage Plan…..PLUS
The Heating Preferred Protection Plan offers the ultimate in peace of mind. You will enjoy guaranteed service from our licensed technicians, free parts and labour on most repairs, no deductible…..24 hours a day, 7 days a week!
The costs to diagnose and replace any covered defective parts are included in your Preferred Heating Protection Plan.
Heating Preferred Protection Plan includes:
- Free Parts and Labour on most repairs
- No deductible
- Breakdown coverage for your furnace with no annual claim limits
- Unlimited number of service calls
- After-hours emergency repairs at no extra cost to you
Parts covered under Heating Protection
Inclusions
- Aqua stat controls
- Automatic gas control valves
- Automatic vent damper/motor
- Blower/component
- Condensate pump
- Door switch
- Electric ignition system
- Fan and limit controls
- Fan motor
- Flame spreader
- Flow switch
- Furnace low voltage circuit fuse
- Gas burner and orifices
- Gas regulator
- Heating circuit transformer
- Pilot burner
- Power burner motor
- Pulley and belt
- Relay
- Roll out switch
- Summer/winter switch
- Thermocouple/generator
- Thermostat (except Wi-Fi enabled)
- Vent system pressure switch
- Ventor motor assembly
Exclusions
- Heat exchanger
- Heating coil (air handler)
- Heating sections (boiler)
- Firebox/combustion chamber
- Wi-Fi enabled thermostats
- Furnace filters
- Low and High water cut off Valves
- Circulating pumps
- Zone valves Parts added on to accommodate ancillary equipment
- Replacement of complete heating unit
- Flushing of the heat exchanger or additional cleaning that is required due to insufficient maintenance prior to joining the Preferred Heating Plan is excluded and will be billed at standard labour rates.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Includes all of the benefits of our Cooling Maintenance Advantage Plan…..PLUS
The Cooling Preferred Protection Plan offers the ultimate in peace of mind. You will enjoy guaranteed service from our licensed technicians, free parts and labour on most repairs, no deductible…..24 hours a day, 7 days a week!
The costs to diagnose and replace any covered defective parts are included in your Preferred Cooling Protection Plan. The costs to diagnose and replace any defective parts which have caused a refrigerant leak are included in your Preferred Cooling Protection Plan including refrigerant recovery, vacuuming and refill.
Cooling Preferred Protection Plan includes:
- Free Parts and Labour on most repairs
- No deductible
- Breakdown coverage for your Air Conditioner with no annual claim limits
- Unlimited number of service calls
Parts covered under Cooling Protection:
Inclusions
- Add-on fan centres
- Capacitor
- Line components
- Internal copper tubing
- Low ambient temperature sensor
- Add-on indoor fan relay
- Cooling contactor/relay
- Evaporator coil
- Internal electrical wiring
- Condenser fan motor
- Thermostat
- Fan blade
Exclusions
- Compressor and condenser coil replacement
- Repairs required within the furnace or air handler
- Additional cleaning that is required due to insufficient maintenance prior to joining any Preferred Cooling Protection Plan is excluded from coverage and will be charged to you at our standard labour rate.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Covers both “Heating” and “Cooling” Maintenance Advantage AND Preferred Protection as above.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
The Plumbing Preferred Protection Plan offers the ultimate in peace of mind. You will enjoy guaranteed service from our licensed technicians, free parts and labour on most repairs, no deductible!
Free yourself from unexpected costs and worries. Benefits of this plan include:
- Diagnosis and repair of your equipment by a fully-licensed plumber
- Avoid out of pocket expenses -most parts and labour covered
Covers the diagnosis, repair, adjustment or, if applicable, replacement, all as we determine necessary of specified parts related to the plumbing and related piping and drains inside your home and waste drainage and rainwater drains within your house or, if you have a condominium, to the point of connection with common elements (your “plumbing and drain system”).
Covered under Plumbing Protection
Inclusions
- Hot and cold water pipes and drainage pipes inside the home
- Faucet repair
- Mechanical pop-up stoppers
- Piping repairs to your humidifier, dishwasher and refrigerator
- Outside hose bibs
- Blocked toilets, sinks, and showers
- Moving parts within the toilet tank
- Toilet flange repair
- Diagnosis of below grade waste drains
- Primer line to laundry tub
- Mixing valves
- Humidifier valves
- Inspection and repair of backwater valves
- Repair of shut-off valves
Exclusions
- Faucet replacement
- Repair or replacement of fixtures (i.e. toilets) or appliances (i.e. dishwashers)
- Swimming pools, hot tubs, radiant in-floor heating
- Clearing of blockages in below grade drains
- Municipal water service issues
- Check valves, backflow preventors, sump pumps
- Pipe replacement required due to poor design
- Replacement of galvanized, lead, cast iron or non-pex piping
- Pipes upstream from main water incoming valve
- Repairs required caused by faulty fixtures or equipment
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Combines the benefits of Preferred Heating Protection & Maintenance Advantage Plan with Plumbing Preferred Protection Plan described above.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Combines the benefits of Preferred Cooling Protection & Maintenance Advantage Plan with Plumbing Preferred Protection Plan described above.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Total Home Protection! Combines the benefits of three of our most popular protection plans together – Heating Protection with Maintenance Advantage, Cooling Protection with Maintenance Advantage and Plumbing Protection, you’ll save over 20%. That’s in addition to saving on parts and labour costs, avoiding emergency service charges, and sparing yourself the uncertainty of what to do.
All plans are subject to the terms and condition set out in “General Terms and Conditions”. Please read the full Terms and Conditions (PDF)
Testimonials










Residential Services
Residential plumbing, heating & air conditioning services in Regina!
- Natural Gas Furnaces - High Efficient
- Water heaters – Gas or Electric RENT OR BUY
- Gas Boiler Systems
- In-Floor heating systems
- Fireplaces
- Natural Gas BBQs
- Pool Heaters
- Unit Heaters
- Radiant Heaters
- Roof top Units
- Air Conditioners
- Air to Air Exchangers
- Humidifiers
- Sheet metal fabrication and installation
- Plumbing installations
- Plumbing Repairs
- Duct and Furnace Cleaning
Commercial Services
Commercial plumbing, heating & air conditioning services in Regina!
- Plumbing
- Heating
- Gas fitting
- Process Piping
- Sheet metal work
- Air Conditioning
- Dust Collector Systems
- Heating, Cooling and Exhaust Ventilation
- Fire Protection
- Control Systems
- Bonding available
- Design-Build Services